SPL Parts Front Adjustable Sway Bar Endlinks (Long) - BMW G8X/G2X/G42

OVERVIEW

SPL adjustable front endlinks (FE) feature massive Teflon-lined FK 1/2" bearings to provide the highest load capacity for use with stiffer aftermarket sway bars. Custom heat-treated chromoly high-misalignment studs connect to the sway bar and offer extreme articulation capability (65°) to prevent the endlink from binding when used with different adjustment holes on aftermarket bars.

The endlinks are length-adjustable to eliminate preload on the sway bars — preload that results from uneven settling of springs or uneven suspension heights after corner weighting. Black anodized 6061-T6 aluminum turnbuckles work with left- and right-hand threaded rod ends for simple, precise adjustment. Suitable for street or race use.

This is the longer version, sized for a sway-bar-to-shock-mount distance of 12.9" to 14.4". M-chassis cars measuring 11.4"–12.9" need the short version — see the link below.

SPECS

• Teflon-lined FK 1/2" spherical bearings for maximum load capacity
• Heat-treated chromoly high-misalignment studs — 65° articulation prevents binding
• Length-adjustable to remove sway bar preload
• Black anodized 6061-T6 aluminum turnbuckles with left/right-hand threaded rod ends
• Fits a sway bar to shock mount distance of 12.9" to 14.4"
• Designed for use with stiffer aftermarket sway bars
• Sold as a pair; made in the USA

PARTS INCLUDED

• 2x SPL adjustable front sway bar endlinks with chromoly studs and hardware

TECH RESOURCES

• Measure before ordering. Check the distance between the sway bar and the shock mount and confirm it falls between 12.9" and 14.4". If your measurement is 11.4"–12.9", order the short M-chassis version (FE F8X) instead
• Note if running aftermarket coilovers: if you have replaced the OEM shocks with aftermarket shocks or coilovers, the mounting location may have moved. SPL cannot confirm fitment with aftermarket shocks and coilovers
• Pairs with stiffer aftermarket sway bars — set length to remove preload after corner-balancing
• Also see our Rear Sway Bar Endlinks to complete the setup
• Installation instructions (PDF): SPL FE E9M Install Guide

PART NUMBER

• SPL FE E9M

VEHICLE APPLICATIONS