Burger Motorsports BMW M2, M3, M4, X3M, & X4M Port Injection Kit for the S58 Motor

OVERVIEW

The Fuel-It! S58 BMW Port Injection Kit is the ultimate fueling solution for 2020+ S58-powered BMWs making big power or running E85, adding six supplemental low-pressure fuel injectors to support fueling up to 1000+ whp. Compatible with pump gas, race gas, methanol, and E85.

SPECS

• CNC machined and anodized for long service life; made in the USA
• Requires injectors to function — order Flow Matched DW or IDX 42mm injectors with the kit (550cc up to 750whp, 750cc up to 850whp, 950cc up to 950whp, 1050cc up to 1100whp) or supply your own
• Requires a port injection controller — BMS controller for JB4 setups, or a stand-alone controller for flash-only/factory ECU setups
• Recommended with a flex fuel kit if running ethanol blends, for accurate real-time ethanol content readings (fill-to-fill content can vary significantly)
• Optional Fuel-It! CANfuel Sequential Port Fuel Injection Controller (discounted when purchased with this kit) enables sequential control of up to 8 injectors plus additional sensor inputs over CANbus

PARTS INCLUDED

• Fuel-It! S58 billet fuel rail
• Stainless steel braided fuel line with black nylon sheathing
• Billet tee fitting (compatible with stock fuel lines and the flex fuel kit)
• -6AN ORB fitting and plug
• 1/8" NPT plugs
• Stainless mounting screws
• Injector installation jig with screw
• 21/64 drill bit for opening the factory injector bosses
• Superlube

TECH RESOURCES

• Complete plug-and-play install, taking about 30 minutes
• If you already have a Fuel-It! flex fuel kit installed, select the corresponding variant to receive the correct line length from the ethanol sensor to the tee fitting (the original flex fuel kit's line is too long once the tee fitting is added)
• See BMS's install video for a full walkthrough

PART NUMBER

• BMW-S58-PIK (base kit; flex-fuel-paired configurations use BMW-S58-PIK-FFKL / BMW-S58-PIK-FFK-G8X / BMW-S58-PIK-FFK-F9X)

VEHICLE APPLICATIONS