B58 Gen 1 Gauntlet HPFP Front

Precision Raceworks B58 Gen 1 Gauntlet HPFP Upgrade

B58 Gen 1 F-Series
$1,815.00
Skip to product information
B58 Gen 1 Gauntlet HPFP Front

Precision Raceworks

Precision Raceworks B58 Gen 1 Gauntlet HPFP Upgrade

$1,815.00
TitleB58 Gen 1 F-Series

Not sure this fits your chassis? Ask us →

OVERVIEW

Unlike low-pressure pump upgrades that address fuel delivery to the engine bay, the Gauntlet is a high-pressure fuel pump (HPFP) upgrade — the pump responsible for pressurizing fuel for direct injection. On heavily tuned B58 Gen 1 engines, the factory HPFP becomes a hard ceiling on power regardless of low-pressure supply. The Precision Raceworks Gauntlet HPFP Upgrade is built to remove that ceiling.

SPECS

  • +70% fuel flow over the stock pump (68% confirmed on PRW's spec sheet), ~4% more than PRW's earlier "Big Bore" HPFP
  • Power potential: up to 1,022 whp on gasoline, 730 whp on E85, at up to 240 bar / 24 MPa / 3,500 psi max operating pressure
  • Cast stainless steel construction; leak- and pressure-tested; each unit serialized with its own flow test data sheet
  • Tested through 60,000+ miles of real-world driving, plus CFD analysis, kinematic/structural testing, and 120+ hours of dyno bench testing
  • Tested across pump gas, E85, and blends in between

PARTS INCLUDED

  • Gauntlet HPFP (cast stainless steel)
  • Low-pressure inlet tube with Teflon internals
  • Stainless steel high-pressure outlet tube
  • Pump adaptation flange and alignment tool
  • Electrical harness adapter
  • Color installation guide and serialized flow test data sheet

TECH RESOURCES

  • Install guide (PDF): PRW B58 Gauntlet HPFP (201-0444) Install Guide
  • A tune is required to safely use the increased fuel delivery — recommended tuning suites are EcuTek, BM3, and MHD. A tuning guide is available to your tuner on request. In stock: MHD Super License for B58 (F+G Series)
  • Pairs with a PRW low-pressure pump upgrade (or the factory pump for moderate builds) — B58 Upgraded Hybrid Fuel Pump
  • Complete the fueling system: B58 Port Injection Kit
  • Plug-and-play, fully reversible — do not install without a tuning plan in place. Fitment/tuning guaranteed only for North America-spec vehicles per PRW
  • Not for sale or use in California on any pollution-controlled vehicle per CARB

PART NUMBER

  • 201-0444

VEHICLE APPLICATIONS

Make Model Chassis Engine Years
BMW 340i F30 B58 Gen 1 2016–2019
BMW 440i F32/F33/F36 B58 Gen 1 2016–2019
BMW 540i G30 B58 Gen 1 2017–2019
BMW 740i G11 B58 Gen 1 2016–2019
BMW M240i F22/F23 B58 Gen 1 2017–2021
BMW X3 M40i G01 B58 Gen 1 2017–2019
BMW X4 M40i G02 B58 Gen 1 2018–2019

You may also like