Bilstein B1 Electronic Damper Control Cancellation Module – BMW G8X M2/M3/M4 (S58)

OVERVIEW

If your G8X M2, M3, or M4 came equipped with electronic damper control (Adaptive M Suspension / EDC), the car's control unit expects to see the factory electronically-adjustable dampers. Fit a set of mechanical coilovers without addressing that, and the system throws a suspension fault and dashboard warning. The Bilstein B1 Electronic Damper Control Cancellation Module solves it: a plug-in set that emulates the OE electronic dampers at all four corners so the vehicle reads a healthy suspension system — no warning lights, no coding required. It is the mandatory companion when installing Bilstein's EVO T2 coilovers on an EDC-equipped G8X.

SPECS

• Bilstein B1-series OE-quality suspension service component
• Electronic damper control (EDC) cancellation set — covers both front and rear axle
• Plug-and-play emulators; prevents the suspension fault/warning triggered when non-electronic coilovers are installed
• No aftermarket coding or tune required
• Required only for vehicles originally equipped with electronic damper control
• Designed and manufactured by Bilstein in Germany

PARTS INCLUDED

• EDC cancellation emulators for the front axle
• EDC cancellation emulators for the rear axle
• Plug-in connectors as supplied by Bilstein

TECH RESOURCES

• Required companion: installed alongside the Bilstein EVO T2 Coilover Kit — M2/M3/M4 (48-309127) — required when that coilover is fitted to a car equipped with electronic damper control
• Only necessary for G8X vehicles originally optioned with electronic damper control (Adaptive M Suspension); cars without it do not need this module

PART NUMBER

• 14-339325

VEHICLE APPLICATIONS

Applies only to vehicles equipped with electronic damper control; installed alongside Bilstein EVO T2 coilovers.