{"title":"Charge Pipes","description":"\u003cp\u003eAluminum and silicone charge pipes, boost pipes and charge pipe kits for BMW B58 and S58 engines and the Toyota GR Supra.\u003c\/p\u003e","products":[{"product_id":"active-autowerke-charge-pipe-g-chassis-m340i-m440i-a90-supra-15-007","title":"Active Autowerke Charge Pipe- G-Chassis M340i M440i \/ A90 SUPRA - 15-007","description":"\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eThe Active Autowerke B58 Charge Pipe has a proper provision for water\/methanol injection. A boss with two separate ports is provided upstream where the injected mix can properly atomize before entering the engine — thread depths for the nozzles are checked to allow a proper spray pattern without hitting the inside walls of the threaded holes.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConsistent diameter tubing for increased performance\u003c\/li\u003e\n\u003cli\u003eIncreased throttle response and decreased throttle lag\u003c\/li\u003e\n\u003cli\u003eCNC machined throttle housing for a proper seal\u003c\/li\u003e\n\u003cli\u003eRetains factory BMW O-ring seal\u003c\/li\u003e\n\u003cli\u003eProvision for 2 water\/methanol injection nozzles\u003c\/li\u003e\n\u003cli\u003eBlack powder coated finish for an OEM look\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x charge pipe\u003c\/li\u003e\n\u003cli\u003eSilicone couplers and stainless clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe factory throttle clip and O-ring are not included with this charge pipe — reuse your OEM pieces.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNot compatible with xDrive models.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eIncludes a boss with two ports for optional water\/methanol injection nozzles (nozzles not included).\u003c\/li\u003e\n\u003cli\u003eFor M340i\/M440i, pair with the Active Autowerke \u003ca href=\"https:\/\/x58cartel.com\/products\/active-autowerke-bmw-supra-b58-catted-downpipe-fits-f-g-chassis-up-to-2024\"\u003eB58 Catted Downpipe\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e15-007\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM340i\u003c\/td\u003e\n\u003ctd\u003eG20\u003c\/td\u003e\n\u003ctd\u003eB58 3.0L\u003c\/td\u003e\n\u003ctd\u003e2019+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM440i\u003c\/td\u003e\n\u003ctd\u003eG22\u003c\/td\u003e\n\u003ctd\u003eB58 3.0L\u003c\/td\u003e\n\u003ctd\u003e2021+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eGR Supra\u003c\/td\u003e\n\u003ctd\u003eA90\/A91\u003c\/td\u003e\n\u003ctd\u003eB58 3.0L\u003c\/td\u003e\n\u003ctd\u003e2020–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Active Autowerke","offers":[{"title":"Default Title","offer_id":53471700779315,"sku":"15-007","price":284.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/4226\/2579\/files\/B58chargea.webp?v=1781219762"},{"product_id":"burger-motorsport-bmw-supra-b58tu-gen-2-charge-pipe-blow-off-valve-bov-kit","title":"Burger Motorsport BMW\/Supra B58TU Gen 2 Charge Pipe Blow-Off Valve (BOV) Kit","description":"\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eThe BMS Elite B58TU Charge Pipe Blow-Off Valve (BOV) Kit brings genuine blow-off valve sound to the B58TU-powered BMW and Supra, using the Turbosmart Raceport valve to release excess charge pipe pressure on lift-off. It's designed and manufactured by Burger Motorsports in the USA.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-gauge aluminum construction with a CNC-machined throttle body and turbo flange for a snug, OEM-style fit\u003c\/li\u003e\n\u003cli\u003eMatte black powder coat finish\u003c\/li\u003e\n\u003cli\u003eThree 1\/8\" NPT bungs for an external boost gauge or methanol nozzles\u003c\/li\u003e\n\u003cli\u003eDouble o-ring seal on the turbo-side charge pipe flange, rated to withstand 40+ psi (vs. the single OEM o-ring other makers reuse, which isn't suited to high boost)\u003c\/li\u003e\n\u003cli\u003eTurbosmart Raceport blow-off valve — reduces compressor surge and improves reliability at higher boost\u003c\/li\u003e\n\u003cli\u003eCompatible with factory tuning, JB4, and flash tuning; works with automatic and manual transmissions\u003c\/li\u003e\n\u003cli\u003e100% reversible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTurbosmart blow-off valve\u003c\/li\u003e\n\u003cli\u003eLower charge pipe\u003c\/li\u003e\n\u003cli\u003eUpper charge pipe with BOV flange\u003c\/li\u003e\n\u003cli\u003e3\"-2.5\" silicone coupler\u003c\/li\u003e\n\u003cli\u003e2.5\" and 3\" T-bolt clamps\u003c\/li\u003e\n\u003cli\u003e1\/8 NPT plugs, mounting bolts, o-rings\u003c\/li\u003e\n\u003cli\u003eBOV adapter + E-clip\u003c\/li\u003e\n\u003cli\u003e90° 1\/8 NPT to 1\/4\" push-lock fittings and 30\" of 1\/4\" tubing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShips with all required hardware and a heavy-duty replacement coupler for a complete install\u003c\/li\u003e\n\u003cli\u003eThis kit fits Gen2 B58 engines only\u003c\/li\u003e\n\u003cli\u003eFor 2023+ X Series vehicles, send engine photos before ordering to confirm fitment\u003c\/li\u003e\n\u003cli\u003eSee the \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0961\/4226\/2579\/files\/B58TU-charge-pipe-BOV-install-guide.pdf?v=1785528554\"\u003einstall guide\u003c\/a\u003e for full instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM240i (incl. xDrive)\u003c\/td\u003e\n\u003ctd\u003eG42\u003c\/td\u003e\n\u003ctd\u003eB58\u003c\/td\u003e\n\u003ctd\u003e2022+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM340i (incl. xDrive)\u003c\/td\u003e\n\u003ctd\u003eG20\/G21\u003c\/td\u003e\n\u003ctd\u003eB58\u003c\/td\u003e\n\u003ctd\u003e2019–2024\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM440i (incl. Gran Coupe\/xDrive)\u003c\/td\u003e\n\u003ctd\u003eG22\/G23\/G26\u003c\/td\u003e\n\u003ctd\u003eB58\u003c\/td\u003e\n\u003ctd\u003e2021–2024\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e540i (incl. xDrive)\u003c\/td\u003e\n\u003ctd\u003eG30\/G31\u003c\/td\u003e\n\u003ctd\u003eB58\u003c\/td\u003e\n\u003ctd\u003e2017–2023\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e640i Gran Coupe (incl. xDrive)\u003c\/td\u003e\n\u003ctd\u003eG32\u003c\/td\u003e\n\u003ctd\u003eB58\u003c\/td\u003e\n\u003ctd\u003e2019+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e740i (incl. xDrive)\u003c\/td\u003e\n\u003ctd\u003eG11\/G12\u003c\/td\u003e\n\u003ctd\u003eB58\u003c\/td\u003e\n\u003ctd\u003e2016–2022\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e840i (incl. Gran Coupe\/xDrive)\u003c\/td\u003e\n\u003ctd\u003eG14\/G15\/G16\u003c\/td\u003e\n\u003ctd\u003eB58\u003c\/td\u003e\n\u003ctd\u003e2019–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eZ4 M40i\u003c\/td\u003e\n\u003ctd\u003eG29\u003c\/td\u003e\n\u003ctd\u003eB58\u003c\/td\u003e\n\u003ctd\u003e2019–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eX3 40i (incl. xDrive)\u003c\/td\u003e\n\u003ctd\u003eG01\u003c\/td\u003e\n\u003ctd\u003eB58\u003c\/td\u003e\n\u003ctd\u003e2018–2024\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eX4 40i (incl. xDrive)\u003c\/td\u003e\n\u003ctd\u003eG02\u003c\/td\u003e\n\u003ctd\u003eB58\u003c\/td\u003e\n\u003ctd\u003e2019–2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eX5 40i (incl. xDrive)\u003c\/td\u003e\n\u003ctd\u003eG05\u003c\/td\u003e\n\u003ctd\u003eB58\u003c\/td\u003e\n\u003ctd\u003e2019–2022\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eX6 40i xDrive\u003c\/td\u003e\n\u003ctd\u003eG06\u003c\/td\u003e\n\u003ctd\u003eB58\u003c\/td\u003e\n\u003ctd\u003e2020+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eX7 40i (incl. xDrive)\u003c\/td\u003e\n\u003ctd\u003eG07\u003c\/td\u003e\n\u003ctd\u003eB58\u003c\/td\u003e\n\u003ctd\u003e2019–2022\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eGR Supra Mk5\u003c\/td\u003e\n\u003ctd\u003eA90\/A91\u003c\/td\u003e\n\u003ctd\u003eB58\u003c\/td\u003e\n\u003ctd\u003e2020–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Burger Motorsports","offers":[{"title":"Default Title","offer_id":53502681678131,"sku":null,"price":629.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/4226\/2579\/files\/b58tu-bmw-charge-pipe-chargepipe-supra-b58-supra-blow-off-valve-2023_7b0d17a8-c948-488b-8915-299f98a83ee3.webp?v=1781646865"},{"product_id":"mishimoto-aluminum-charge-pipe-kit-bmw-g8x-m2-m3-m4","title":"Mishimoto Aluminum Charge Pipe Kit - BMW G8X M2\/M3\/M4","description":"\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eThe stock S58 charge pipe carries boost from both turbos to the intake manifold and intercooler through two rubber hoses and an ugly plastic merge — and some owners running more boost are already seeing cracks and failures of that plastic merge. Mishimoto's aluminum charge pipe kit for the G8X M2, M3, and M4 replaces the fragile plastic with durable cast aluminum for improved flow and reliability.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e27% less restrictive than stock for improved flow and power potential\u003c\/li\u003e\n\u003cli\u003eReplaces fragile plastic with durable cast aluminum to help prevent costly failures\u003c\/li\u003e\n\u003cli\u003eRetains the flexibility of the stock front section but replaces the stock rubber hoses with durable silicone\u003c\/li\u003e\n\u003cli\u003eOptimized transitions reduce restrictions and improve flow\u003c\/li\u003e\n\u003cli\u003eCNC-machined turbo and throttle adapters for leak-free operation\u003c\/li\u003e\n\u003cli\u003eSerrated adapters prevent hoses from blowing off at high boost pressure\u003c\/li\u003e\n\u003cli\u003eAdditional port that can be drilled and tapped for methanol injection or sensors\u003c\/li\u003e\n\u003cli\u003eLarger throttle body quick-disconnect matches throttle ID\u003c\/li\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAluminum charge pipes\u003c\/li\u003e\n\u003cli\u003eCNC adapters\u003c\/li\u003e\n\u003cli\u003eAluminum spacer\u003c\/li\u003e\n\u003cli\u003eRubber grommets\u003c\/li\u003e\n\u003cli\u003eSilicone couplers\u003c\/li\u003e\n\u003cli\u003eHigh-torque worm gear clamps\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBolt-on install — includes all required couplers, clamps, and mounting hardware\u003c\/li\u003e\n\u003cli\u003ePairs with the Mishimoto \u003ca href=\"https:\/\/x58cartel.com\/products\/mishimoto-performance-charge-air-cooler-manifold-bmw-g8x-m2-m3-m4\"\u003eS58 Performance Charge Air Cooler Manifold\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMMICP-G80-21\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM2\u003c\/td\u003e\n\u003ctd\u003eG87\u003c\/td\u003e\n\u003ctd\u003eS58\u003c\/td\u003e\n\u003ctd\u003e2023+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3 (incl. Competition)\u003c\/td\u003e\n\u003ctd\u003eG80\u003c\/td\u003e\n\u003ctd\u003eS58\u003c\/td\u003e\n\u003ctd\u003e2021+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4 (incl. Competition, Convertible)\u003c\/td\u003e\n\u003ctd\u003eG82\/G83\u003c\/td\u003e\n\u003ctd\u003eS58\u003c\/td\u003e\n\u003ctd\u003e2021+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eX3 M\u003c\/td\u003e\n\u003ctd\u003eF97\u003c\/td\u003e\n\u003ctd\u003eS58\u003c\/td\u003e\n\u003ctd\u003e2020–2024\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eX4 M\u003c\/td\u003e\n\u003ctd\u003eF98\u003c\/td\u003e\n\u003ctd\u003eS58\u003c\/td\u003e\n\u003ctd\u003e2020–2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":53631116968243,"sku":"MMICP-G80-21","price":764.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/4226\/2579\/files\/mmicp-g80-21_1.jpg?v=1783553115"},{"product_id":"mishimoto-b58tu-performance-charge-pipe-m340i-z4-supra","title":"Mishimoto B58TU Performance Charge Pipe - M340i\/Z4\/Supra","description":"\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eRegardless of power goals, your B58 needs to breathe. The stock plastic charge pipe between the turbocharger and intake manifold is adequate for daily driving, but this Mishimoto performance aluminum charge pipe replaces the fragile plastic with a free-flowing 3\" aluminum version guaranteed to last the lifetime of your BMW or Supra.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDirect fit for 2019+ G20 M340i and G29 Z4 M40i, and 2020+ Toyota GR Supra\u003c\/li\u003e\n\u003cli\u003e3\" mandrel-bent piping with internal transitions for reduced turbulence and improved flow\u003c\/li\u003e\n\u003cli\u003eReduces restriction by up to 42% over the stock pipe\u003c\/li\u003e\n\u003cli\u003eIncluded coupler uses steel wire reinforcement to prevent ballooning under high boost\u003c\/li\u003e\n\u003cli\u003eTwo-piece design for a perfect fit and easy installation\u003c\/li\u003e\n\u003cli\u003ePrecision CNC-machined adapters for smooth flow and a secure fit\u003c\/li\u003e\n\u003cli\u003eTwo pre-installed bungs can be drilled and tapped for boost sensors, nitrous, or methanol injection\u003c\/li\u003e\n\u003cli\u003eConstant-tension worm gear clamps included\u003c\/li\u003e\n\u003cli\u003eMicro-wrinkle black powdercoated finish\u003c\/li\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTwo-piece aluminum charge pipe\u003c\/li\u003e\n\u003cli\u003eWire-reinforced silicone coupler\u003c\/li\u003e\n\u003cli\u003eCNC-machined adapters\u003c\/li\u003e\n\u003cli\u003eConstant-tension worm gear clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBolt-on install — includes all required couplers and clamps\u003c\/li\u003e\n\u003cli\u003eNot for sale or use in the State of California on any pollution-controlled vehicle per CARB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMMICP-SUP-20\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM340i (incl. xDrive)\u003c\/td\u003e\n\u003ctd\u003eG20\/G21\u003c\/td\u003e\n\u003ctd\u003eB58\u003c\/td\u003e\n\u003ctd\u003e2019+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eZ4 M40i\u003c\/td\u003e\n\u003ctd\u003eG29\u003c\/td\u003e\n\u003ctd\u003eB58\u003c\/td\u003e\n\u003ctd\u003e2019–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eGR Supra 3.0\u003c\/td\u003e\n\u003ctd\u003eA90\/A91\u003c\/td\u003e\n\u003ctd\u003eB58\u003c\/td\u003e\n\u003ctd\u003e2020–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":53631117426995,"sku":"MMICP-SUP-20","price":349.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/4226\/2579\/files\/mmicp-sup-20wbk_1.webp?v=1783621689"},{"product_id":"wagner-tuning-boostpipe-kit-bmw-m3-g80-competition-s58","title":"Wagner Tuning Boostpipe-Kit - BMW M3 G80 Competition (S58)","description":"\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eWagner Tuning's Boostpipe Kit for the S58 replaces the factory charge piping between the turbochargers and intake manifold with a more robust, higher-flowing design — reducing pressure loss and improving throttle response on the M3 G80 Competition.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eImproved flow over factory charge piping\u003c\/li\u003e\n\u003cli\u003eReduces pressure loss between the turbochargers and intake manifold\u003c\/li\u003e\n\u003cli\u003eRobust construction built for sustained boost pressure\u003c\/li\u003e\n\u003cli\u003ePlug-and-play installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWagner Tuning S58 boostpipe set\u003c\/li\u003e\n\u003cli\u003eCouplers, clamps, and mounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePairs with the Wagner Tuning \u003ca href=\"https:\/\/x58cartel.com\/products\/wagner-tuning-hybrid-carbon-intake-manifold-with-integrated-intercooler-bmw-s58\"\u003eS58 Intake Manifold with Integrated Intercooler\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003ePlug-and-play installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e210001187\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3 Sedan (Competition)\u003c\/td\u003e\n\u003ctd\u003eG80\u003c\/td\u003e\n\u003ctd\u003eS58\u003c\/td\u003e\n\u003ctd\u003e2021+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Wagner Tuning","offers":[{"title":"Default Title","offer_id":53631179882803,"sku":"210001187","price":590.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/4226\/2579\/files\/Wagner210001187_1.jpg?v=1783713684"},{"product_id":"do88-charge-pipe-silicone-hose-kit-bmw-b58-s58-amp-toyota-supra","title":"do88 Charge Pipe (Silicone Hose Kit) – BMW B58\/S58 \u0026 Toyota Supra","description":"\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eThe factory charge pipe system on B58 and S58 engines relies on plastic pipes and rubber\/silicone couplers that are a known weak point once boost is increased beyond stock levels — they're prone to cracking, ballooning, or blowing off entirely under sustained high boost. The do88 Charge Pipe kit is a complete replacement system: mandrel-bent aluminum piping paired with do88's own high-temperature, high-pressure silicone hoses, engineered specifically for each platform's charge pipe routing.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePiping:\u003c\/strong\u003e Mandrel-bent aluminum charge pipe(s), replacing the factory plastic sections with smooth, consistent-diameter tubing for improved flow and durability\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilicone hoses:\u003c\/strong\u003e do88's own silicone couplers connect the aluminum piping to the turbo\/charge cooler manifold — rigid enough to resist ballooning under boost and collapsing under vacuum, unlike factory rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eS58 specific:\u003c\/strong\u003e Includes a mandrel-bent charge pipe from the rear turbo along with a cast aluminum Y-pipe, replacing the factory plastic sections entirely — increases heat and pressure tolerance and integrates cleanly into the engine bay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eB58 specific:\u003c\/strong\u003e Replaces the factory plastic charge pipe routing between the turbo\/charge cooler manifold and throttle body with do88's aluminum-and-silicone system; ~27% more flow than OEM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete kit:\u003c\/strong\u003e Includes everything needed for the swap — pipe(s), silicone hoses, and clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x do88 charge pipe kit (platform-specific): aluminum pipe(s), silicone hoses\/couplers, and clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDirect-fit design intended for a straightforward, bolt-on installation — do88 provides installation instructions with each kit.\u003c\/li\u003e\n\u003cli\u003eReplaces the factory plastic charge piping entirely; retains factory-style connection points at the turbo\/manifold and throttle body ends.\u003c\/li\u003e\n\u003cli\u003eOn the G-Series (Gen 2) platform, space between the throttle body and slam panel is very limited — minor grinding of the slam panel edge may be required to fit the pipe.\u003c\/li\u003e\n\u003cli\u003eStrongly recommended for any vehicle running higher-than-stock boost, since the factory plastic charge piping is a common failure point once boost increases.\u003c\/li\u003e\n\u003cli\u003ePairs well with a \u003ca href=\"https:\/\/x58cartel.com\/products\/do88-charge-cooler-manifold-bmw-b58-s58-amp-toyota-supra\"\u003edo88 Charge Cooler Manifold\u003c\/a\u003e and\/or \u003ca href=\"https:\/\/x58cartel.com\/products\/do88-front-intercooler-radiator-heat-exchanger-bmw-b58-s58-amp-toyota-supra\"\u003eFront Intercooler Radiator\u003c\/a\u003e for a complete charge-air system upgrade, though it installs and functions independently as well.\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0961\/4226\/2579\/files\/TR-410.pdf?v=1785358284\" target=\"_blank\"\u003eTR-410 installation instructions (B58 Gen 1) »\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0961\/4226\/2579\/files\/TR-390-GX.pdf?v=1785358284\" target=\"_blank\"\u003eTR-390-GX installation instructions (B58 Gen 2 \/ Supra) »\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0961\/4226\/2579\/files\/TR-420.pdf?v=1785358285\" target=\"_blank\"\u003eTR-420 installation instructions (S58 G8X) »\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTR-410 (B58 Gen 1 F-Series)\u003c\/li\u003e\n\u003cli\u003eTR-390-GX (B58 Gen 2 G-Series and Supra)\u003c\/li\u003e\n\u003cli\u003eTR-420 (S58 G8X)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;text-align:left;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM240i\u003c\/td\u003e\n\u003ctd\u003eF22\u003c\/td\u003e\n\u003ctd\u003eB58 (Gen 1)\u003c\/td\u003e\n\u003ctd\u003e2017–2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e340i\u003c\/td\u003e\n\u003ctd\u003eF30\u003c\/td\u003e\n\u003ctd\u003eB58 (Gen 1)\u003c\/td\u003e\n\u003ctd\u003e2016–2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e440i\u003c\/td\u003e\n\u003ctd\u003eF32\u003c\/td\u003e\n\u003ctd\u003eB58 (Gen 1)\u003c\/td\u003e\n\u003ctd\u003e2017–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eX3 M40i\u003c\/td\u003e\n\u003ctd\u003eG01\u003c\/td\u003e\n\u003ctd\u003eB58 (Gen 2)\u003c\/td\u003e\n\u003ctd\u003e2018–2024\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eX4 M40i\u003c\/td\u003e\n\u003ctd\u003eG02\u003c\/td\u003e\n\u003ctd\u003eB58 (Gen 2)\u003c\/td\u003e\n\u003ctd\u003e2019–2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eX5 sDrive40i \/ xDrive40i\u003c\/td\u003e\n\u003ctd\u003eG05\u003c\/td\u003e\n\u003ctd\u003eB58 (Gen 2)\u003c\/td\u003e\n\u003ctd\u003e2019+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eX6 xDrive40i\u003c\/td\u003e\n\u003ctd\u003eG06\u003c\/td\u003e\n\u003ctd\u003eB58 (Gen 2)\u003c\/td\u003e\n\u003ctd\u003e2020+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eX7 xDrive40i\u003c\/td\u003e\n\u003ctd\u003eG07\u003c\/td\u003e\n\u003ctd\u003eB58 (Gen 2)\u003c\/td\u003e\n\u003ctd\u003e2019+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e740i \/ 745e (xDrive)\u003c\/td\u003e\n\u003ctd\u003eG11 \/ G12\u003c\/td\u003e\n\u003ctd\u003eB58 (Gen 2)\u003c\/td\u003e\n\u003ctd\u003e2018–2022\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e840i (xDrive)\u003c\/td\u003e\n\u003ctd\u003eG14 \/ G15 \/ G16\u003c\/td\u003e\n\u003ctd\u003eB58 (Gen 2)\u003c\/td\u003e\n\u003ctd\u003e2019–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM340i \/ M340i xDrive\u003c\/td\u003e\n\u003ctd\u003eG20 \/ G21\u003c\/td\u003e\n\u003ctd\u003eB58 (Gen 2)\u003c\/td\u003e\n\u003ctd\u003e2019+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM440i \/ M440i xDrive (Convertible)\u003c\/td\u003e\n\u003ctd\u003eG22 \/ G23 \/ G26\u003c\/td\u003e\n\u003ctd\u003eB58 (Gen 2)\u003c\/td\u003e\n\u003ctd\u003e2021+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e540i \/ 540i xDrive\u003c\/td\u003e\n\u003ctd\u003eG30 \/ G31\u003c\/td\u003e\n\u003ctd\u003eB58 (Gen 2)\u003c\/td\u003e\n\u003ctd\u003e2017–2023\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e640i xDrive\u003c\/td\u003e\n\u003ctd\u003eG32\u003c\/td\u003e\n\u003ctd\u003eB58 (Gen 2)\u003c\/td\u003e\n\u003ctd\u003e2017–2023\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3 \/ M3 Competition\u003c\/td\u003e\n\u003ctd\u003eG80\u003c\/td\u003e\n\u003ctd\u003eS58\u003c\/td\u003e\n\u003ctd\u003e2021+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4 \/ M4 Competition\u003c\/td\u003e\n\u003ctd\u003eG82\u003c\/td\u003e\n\u003ctd\u003eS58\u003c\/td\u003e\n\u003ctd\u003e2021+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM2\u003c\/td\u003e\n\u003ctd\u003eG87\u003c\/td\u003e\n\u003ctd\u003eS58\u003c\/td\u003e\n\u003ctd\u003e2023+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eGR Supra 3.0 \/ 3.0 Premium\u003c\/td\u003e\n\u003ctd\u003eA90 \/ A91\u003c\/td\u003e\n\u003ctd\u003eB58 (Gen 2)\u003c\/td\u003e\n\u003ctd\u003e2020–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eNote: do88 doesn't sell a standalone silicone hose kit for this platform — the silicone hoses are engineered as part of this charge pipe system. Always confirm your exact chassis and engine generation before ordering.\u003c\/em\u003e\u003c\/p\u003e\n","brand":"do88","offers":[{"title":"B58 Gen 1 F-Series","offer_id":53704132460851,"sku":"TR-410","price":478.25,"currency_code":"USD","in_stock":true},{"title":"B58 Gen 2 G-Series and Supra","offer_id":53704132493619,"sku":"TR-390-GX","price":456.23,"currency_code":"USD","in_stock":true},{"title":"S58 G8X M2 M3 M4","offer_id":53704132526387,"sku":"TR-420","price":869.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/4226\/2579\/files\/TR-410_S.jpg?v=1784854097"},{"product_id":"ams-performance-toyota-gr-supra-3-charge-pipe","title":"AMS Performance Toyota GR Supra 3\" Charge Pipe","description":"\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eOn a turbocharged engine, removing induction restriction is one of the easiest ways to improve airflow and horsepower. The AMS Performance Toyota GR Supra 3″ Charge Pipe is a direct replacement for the flimsy OEM plastic charge pipe, which is a known failure point under boost. Made from lightweight 3″ mandrel-bent aluminum with smooth, non-turbulent adapter transitions, it feeds air into the B58 as efficiently as possible — and future-proofs your build for an upgraded turbo down the road.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFull 3″ mandrel-bent aluminum tubing, matte black powder coat\u003c\/li\u003e\n\u003cli\u003eUp to 52% increase in cross-sectional area over OEM in the most restrictive sections (~30% average)\u003c\/li\u003e\n\u003cli\u003eEliminates the OEM plastic charge-pipe failure risk under high boost\u003c\/li\u003e\n\u003cli\u003eDual 1\/8″ NPT ports for methanol, nitrous, or sensors\u003c\/li\u003e\n\u003cli\u003eCNC-machined, black-anodized throttle-body and compressor-outlet adapters\u003c\/li\u003e\n\u003cli\u003eBead-rolled ends for a secure high-boost seal\u003c\/li\u003e\n\u003cli\u003eCompatible with stock turbo and future 2.5″ or 3″ compressor outlets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e3″ aluminum charge pipe (powder-coated black)\u003c\/li\u003e\n\u003cli\u003e4-ply silicone couplers\u003c\/li\u003e\n\u003cli\u003eCNC-machined throttle-body adapter (black anodized)\u003c\/li\u003e\n\u003cli\u003eCNC-machined compressor-outlet adapter (black anodized)\u003c\/li\u003e\n\u003cli\u003eClamps and associated hardware\u003c\/li\u003e\n\u003cli\u003eOnline installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRecommended companions: \u003ca href=\"\/products\/ams-performance-toyota-gr-supra-intake-manifold\"\u003eAMS GR Supra Intake Manifold\u003c\/a\u003e, \u003ca href=\"\/products\/ams-performance-toyota-gr-supra-heat-exchanger\"\u003eAMS GR Supra Heat Exchanger\u003c\/a\u003e, and \u003ca href=\"\/products\/ams-performance-toyota-gr-supra-street-downpipe-w-gesi-catalytic-converter\"\u003eAMS GR Supra Street Downpipe\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstall instructions (PDF): \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0961\/4226\/2579\/files\/AMS-Supra-Charge-Pipe-Install-Instructions-V2.pdf?v=1785460189\" target=\"_blank\" rel=\"noopener\"\u003eAMS Supra Charge Pipe Install Guide\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstall\/overview video: \u003ca href=\"https:\/\/www.youtube.com\/watch?v=-jJlXcEgXa4\" target=\"_blank\" rel=\"noopener\"\u003eAMS Supra Charge Pipe (YouTube)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAMS.38.09.0001-1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eGR Supra 3.0\u003c\/td\u003e\n\u003ctd\u003eA90 \/ A91\u003c\/td\u003e\n\u003ctd\u003eB58\u003c\/td\u003e\n\u003ctd\u003e2020–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"AMS Performance","offers":[{"title":"Default Title","offer_id":53762160034099,"sku":"AMS.38.09.0001-1","price":429.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/4226\/2579\/files\/DSC03039-Edit-scaled-1.jpg?v=1785371746"},{"product_id":"afe-bladerunner-charge-pipe-toyota-gr-supra-a90-a91-b58","title":"aFe BladeRunner Hot-Side Charge Pipe – Toyota GR Supra A90\/A91 (B58)","description":"\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eThe aFe BladeRunner Hot-Side Charge Pipe replaces the flimsy OEM plastic charge pipe on the B58 GR Supra — a known boost-leak and failure point — with TIG-welded, mandrel-bent aluminum. Running from the turbo compressor outlet to the intercooler inlet, it steps up to a 2-1\/2\" → 3\" diameter for smoother, less restrictive flow and reliable boost holding, and it's ready for upgraded turbo and high-boost builds. Available in a black or red wrinkle powder-coat finish.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHot-side charge pipe — turbo compressor outlet to intercooler inlet\u003c\/li\u003e\n\u003cli\u003eTIG-welded, mandrel-bent aluminum tubing, 2-1\/2\" → 3\" transition\u003c\/li\u003e\n\u003cli\u003eReplaces the failure-prone OEM plastic charge pipe and eliminates boost leaks\u003c\/li\u003e\n\u003cli\u003eWrinkle powder-coat finish — Black or Red\u003c\/li\u003e\n\u003cli\u003e5-ply polyester-reinforced silicone couplings\u003c\/li\u003e\n\u003cli\u003eStainless-steel spring-loaded T-bolt clamps\u003c\/li\u003e\n\u003cli\u003eBillet aluminum factory-style quick-connect adapter with O-ring seal\u003c\/li\u003e\n\u003cli\u003e1\/8\" NPT port for a sensor or water-methanol injection\u003c\/li\u003e\n\u003cli\u003eNot CARB compliant; not for sale or use in California\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAluminum hot-side charge pipe\u003c\/li\u003e\n\u003cli\u003e5-ply silicone couplings\u003c\/li\u003e\n\u003cli\u003eStainless-steel T-bolt clamps\u003c\/li\u003e\n\u003cli\u003eBillet quick-connect adapter with O-ring\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0961\/4226\/2579\/files\/46-20398-B_Ins.pdf?v=1785461337\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eNot CARB compliant — not available for sale or use in California\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBlack — 46-20398-B\u003c\/li\u003e\n\u003cli\u003eRed — 46-20398-R\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eGR Supra 3.0\u003c\/td\u003e\n\u003ctd\u003eA90 \/ A91\u003c\/td\u003e\n\u003ctd\u003eB58 3.0L\u003c\/td\u003e\n\u003ctd\u003e2020–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"aFe Power","offers":[{"title":"Black","offer_id":53769161802035,"sku":"46-20398-B","price":393.0,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":53769161834803,"sku":"46-20398-R","price":440.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/4226\/2579\/files\/46-20398-b_1.webp?v=1785535640"},{"product_id":"afe-bladerunner-charge-pipe-bmw-z4-m40i-g29-b58","title":"aFe BladeRunner Hot-Side Charge Pipe – BMW Z4 M40i (G29) B58","description":"\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eThe aFe BladeRunner Hot-Side Charge Pipe replaces the flimsy OEM plastic charge pipe on the B58-powered Z4 M40i — a known boost-leak and failure point — with TIG-welded, mandrel-bent aluminum. Running from the turbo compressor outlet to the intercooler inlet, it steps up to a 2-1\/2\" → 3\" diameter for smoother, less restrictive flow and reliable boost holding on stock and upgraded setups. Available in a black or blue wrinkle powder-coat finish.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHot-side charge pipe — turbo compressor outlet to intercooler inlet\u003c\/li\u003e\n\u003cli\u003eTIG-welded, mandrel-bent aluminum tubing, 2-1\/2\" → 3\" transition\u003c\/li\u003e\n\u003cli\u003eReplaces the failure-prone OEM plastic charge pipe and eliminates boost leaks\u003c\/li\u003e\n\u003cli\u003eWrinkle powder-coat finish — Black or Blue\u003c\/li\u003e\n\u003cli\u003e5-ply polyester-reinforced silicone couplings\u003c\/li\u003e\n\u003cli\u003eStainless-steel spring-loaded T-bolt clamps\u003c\/li\u003e\n\u003cli\u003eBillet aluminum factory-style quick-connect adapter with O-ring seal\u003c\/li\u003e\n\u003cli\u003e1\/8\" NPT port for a sensor or water-methanol injection\u003c\/li\u003e\n\u003cli\u003eNot CARB compliant; not for sale or use in California\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAluminum hot-side charge pipe\u003c\/li\u003e\n\u003cli\u003e5-ply silicone couplings\u003c\/li\u003e\n\u003cli\u003eStainless-steel T-bolt clamps\u003c\/li\u003e\n\u003cli\u003eBillet quick-connect adapter with O-ring\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0961\/4226\/2579\/files\/46-20408-B_Ins.pdf?v=1785461338\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eNot CARB compliant — not available for sale or use in California\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBlack — 46-20408-B\u003c\/li\u003e\n\u003cli\u003eBlue — 46-20408-L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eZ4 M40i\u003c\/td\u003e\n\u003ctd\u003eG29\u003c\/td\u003e\n\u003ctd\u003eB58 3.0L\u003c\/td\u003e\n\u003ctd\u003e2019–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"aFe Power","offers":[{"title":"Black","offer_id":53769162686771,"sku":"46-20408-B","price":491.25,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":53769162719539,"sku":"46-20408-L","price":537.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/4226\/2579\/files\/46-20408-b_1.webp?v=1785535814"},{"product_id":"afe-bladerunner-charge-pipe-bmw-540i-g30-g31-g38-b58","title":"aFe BladeRunner Hot-Side Charge Pipe – BMW 540i (G30\/G31\/G38) B58","description":"\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eThe aFe BladeRunner Hot-Side Charge Pipe replaces the flimsy OEM plastic charge pipe on the B58-powered 540i — a known boost-leak and failure point — with TIG-welded, mandrel-bent aluminum. Running from the turbo compressor outlet to the intercooler inlet in a 2-1\/4\" → 2-3\/4\" diameter, it smooths flow and holds boost reliably on stock and tuned setups. Finished in black wrinkle powder-coat.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHot-side charge pipe — turbo compressor outlet to intercooler inlet\u003c\/li\u003e\n\u003cli\u003eTIG-welded, mandrel-bent aluminum tubing, 2-1\/4\" → 2-3\/4\" transition\u003c\/li\u003e\n\u003cli\u003eReplaces the failure-prone OEM plastic charge pipe and eliminates boost leaks\u003c\/li\u003e\n\u003cli\u003eBlack wrinkle powder-coat finish\u003c\/li\u003e\n\u003cli\u003e5-ply polyester-reinforced silicone couplings\u003c\/li\u003e\n\u003cli\u003eStainless-steel spring-loaded T-bolt clamps\u003c\/li\u003e\n\u003cli\u003eBillet aluminum factory-style quick-connect adapter with O-ring seal\u003c\/li\u003e\n\u003cli\u003e1\/8\" NPT port for a sensor or water-methanol injection\u003c\/li\u003e\n\u003cli\u003eNot CARB compliant; not for sale or use in California\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAluminum hot-side charge pipe\u003c\/li\u003e\n\u003cli\u003e5-ply silicone couplings\u003c\/li\u003e\n\u003cli\u003eStainless-steel T-bolt clamps\u003c\/li\u003e\n\u003cli\u003eBillet quick-connect adapter with O-ring\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0961\/4226\/2579\/files\/46-20548-B_Ins.pdf?v=1785461337\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eNot CARB compliant — not available for sale or use in California\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e46-20548-B\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e540i \/ 540i xDrive\u003c\/td\u003e\n\u003ctd\u003eG30\u003c\/td\u003e\n\u003ctd\u003eB58 3.0L\u003c\/td\u003e\n\u003ctd\u003e2017–2023\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e540i Touring\u003c\/td\u003e\n\u003ctd\u003eG31\u003c\/td\u003e\n\u003ctd\u003eB58 3.0L\u003c\/td\u003e\n\u003ctd\u003e2017–2023\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e540Li\u003c\/td\u003e\n\u003ctd\u003eG38\u003c\/td\u003e\n\u003ctd\u003eB58 3.0L\u003c\/td\u003e\n\u003ctd\u003e2017–2023\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"aFe Power","offers":[{"title":"Default Title","offer_id":53769166029107,"sku":"46-20548-B","price":393.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/4226\/2579\/files\/46-20548-b_1.webp?v=1785535895"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/4226\/2579\/collections\/B58chargea.webp?v=1789174917","url":"https:\/\/x58cartel.com\/collections\/charge-pipes.oembed","provider":"x58cartel","version":"1.0","type":"link"}